The wall panels are a combo of metal board + bronze glass.

You can choose between glass or metal for the wall panels.

Size:

• 1000 x 900 x 2150 (1000mm door)

• 900 x 1000 x 2150 (900mm door)
  (If the installation space is narrow, a 900mm door will be made.)
  The measurements are based on the widest side of the floor panel. A minimum of 20mm clearance is required for installation space.
  Since the shower booth is assembled on-site, the entrance door dimensions are not critical.

Design:
The design is simple, focusing on clean lines, with a combination of gray metal board and bronze tempered glass, creating an atmospheric and elegant look.

Technology:

• 30 years of manufacturing experience and a 10,000-pyeong in-house factory for development, design, and production capabilities.

• ① Can be installed in any space

• ② Easy installation using a patented, screw-free joining structure
  (Ships in semi-assembled form, requires tools: screwdriver, spanner)

• ③ Easy disassembly and reinstallation without damaging the product, as no screws are used

• ④ Waterproof tray: Produced using in-house vacuum molding equipment and technology
  (Reinforced with eco-friendly urethane instead of FRP)

Waterproof floor panel, door and 3 wall panels, ceiling panel, faucet + showerhead, mirror, shelf, lighting, ventilation fan, switch

Additional Options:

• Sink (110,000 KRW)

• Wooden footboard for pipe cover (165,000 KRW) (Dimensions: 1020 x 1200 x 150mm height)

The wooden platform currently being shipped in 2024 is chocolate brown.

☞ When installing a temporary shower booth, if the drainage pipe is not buried in the floor 

and the PVC pipe is exposed above the floor, you will need to create an additional 

wooden deck to raise the height before installing the shower booth.

If the pipes are exposed or the drainage location is more than 50cm away from the shower booth, 

an additional wooden footboard must be installed to ensure smooth drainage.

This is the actual wooden footboard installed in 2022. A hole is made at the drainage location, 

and a flexible pipe is connected from the top.

This is the waterproof-coated wooden footboard being delivered in 2022 (dimensions: 1020 x 1200 x 150mm). 

The tray is placed on top of the footboard, and the booth is assembled on it.

The wooden footboard is 30cm larger than the booth in the front, acting as a step when entering. 

Since the shower booth is assembled on-site, the entrance door dimensions are not critical.

For reference, here is the photo with the sink option added. 

Since it is not possible to attach a heavy ceramic sink, the sink is made from molded plastic.

SPACE 1000 – Plumbing Preparation Guide

1. Hot and cold water supply pipes must be installed on the back wall of the shower booth using 15mm piping.

The pipe ends must be finished with angle valves to allow connection to the shower faucet via high-pressure hoses.

2. The drainage pipe must be embedded in the floor and should be at least 50mm in diameter.

The system is designed to connect using a 40mm flexible hose typically used for bathtubs or sinks.

3. If the drainage pipe is exposed on the floor surface, an additional deck must be constructed to cover it before installation.

4. For the ventilation fan, a 100mm flexible duct hose should be prepared for connection.

Information on plumbing preparation and installation methods can be found in the technical documents above.

Inside the “Installation Drawings” section, you’ll also find an assembly video.

To watch the assembly video right now, click the YouTube link below:

https://youtu.be/4g9sQUmUWZQ

For more information on installation methods, please refer to the blog below:

https://blog.naver.com/pks0079