Size: 1000 x 900 x 2150

Design: Designed simply with a focus on lines, blending gold metal boards and 

bronze reinforced glass to create an elegant atmosphere.

Technology: 

With 30 years of manufacturing experience and a self-owned factory of 

10,000 pyeong, we possess the ability to develop, design, and produce.

1. Can be installed in any space.

2. The unique patented assembly method, which does not require any screws, makes installation easy.
   (Ships in semi-assembled state; required tools - screwdriver, wrench)

3. Easy to disassemble and relocate. Since no screws are used, the product remains undamaged.

4. Waterproof Tray: Produced using our own vacuum-forming equipment and technology.
   (Reinforced with eco-friendly urethane material instead of FRP)

Note:
When installing a compact shower booth, if the drain is not recessed into the floor and the PVC pipe 

is exposed above the floor, you will need to build a wooden deck to raise the height before installing the shower booth.

If the plumbing is exposed or if the drain is located more than 50 cm away 

from the shower booth, an additional wooden footboard must be installed to ensure proper drainage.

The wooden platform currently being shipped in 2024 is chocolate brown.

SPACE 1000 – Plumbing Preparation Guide

1. Hot and cold water supply pipes must be installed on the back wall of the shower booth using 15mm piping.

The pipe ends must be finished with angle valves to allow connection to the shower faucet via high-pressure hoses.

2. The drainage pipe must be embedded in the floor and should be at least 50mm in diameter.

The system is designed to connect using a 40mm flexible hose typically used for bathtubs or sinks.

3. If the drainage pipe is exposed on the floor surface, an additional deck must be constructed to cover it before installation.

4. For the ventilation fan, a 100mm flexible duct hose should be prepared for connection.

Information on plumbing preparation and installation methods can be found in the technical documents above.

Inside the “Installation Drawings” section, you’ll also find an assembly video.

To watch the assembly video right now, click the YouTube link below:

https://youtu.be/4g9sQUmUWZQ

For more information on installation methods, please refer to the blog below:

https://blog.naver.com/pks0079